Buildability™
Score a property
  1. Zoning
  2. Billings, MT
  3. N1

Billings, MT · zoning record

N1 zoning in Billings.

The dimensional standards that govern what you can build in the N1 district, straight from Billings's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-10-02)

N1 dimensional standards.

These are the letter-of-the-law limits for the base N1 district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Interior side setback

5 ft

Required space from a side line.

“Side Setback (feet) Space Between Principal Buildings on Lot (feet) 5 minimum 10 minimum”Sec. 27-304. N1 district. › 27-304 · Billings code · read 2026-10-02

Rear setback

5 ft

Required space from the rear line.

“Rear Setback (feet) 5 minimum”Sec. 27-304. N1 district. › 27-304 · Billings code · read 2026-10-02

Maximum building coverage

60 %

Share of the lot the building footprint may cover.

“Maximum Building Coverage (%) 60”Sec. 27-304. N1 district. › 27-304 · Billings code · read 2026-10-02

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Informational only — not a permit, appraisal, or professional engineering opinion. Verify with your local planning department before acting on it. See Terms and data sources.

Other Billings districts on record.

N2N3NX1RMH

Check a real Billings lot against N1.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states