Maximum height
35 ftHow tall the building may be.
“Maximum: 3 stories or 35’.”DTR district is proposed to: › 3.6.B · Jacksonville code · read 2026-10-03
Jacksonville, NC · zoning record
The dimensional standards that govern what you can build in the DTR district, straight from Jacksonville's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.
Free · Every figure cited · Read from the current code (2026-10-03)
These are the letter-of-the-law limits for the base DTR district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.
How tall the building may be.
“Maximum: 3 stories or 35’.”DTR district is proposed to: › 3.6.B · Jacksonville code · read 2026-10-03
Story cap where the code sets one.
“Maximum: 3 stories or”DTR district is proposed to: › 3.6.B · Jacksonville code · read 2026-10-03
Smallest conforming lot.
“All lots in the DTR Zone shall be a minimum of 3,000 square feet with the following”DTR district is proposed to: › 3.6.B · Jacksonville code · read 2026-10-03
Narrowest conforming lot.
“Minimum width of 30’ measured at the front from the setback.”DTR district is proposed to: › 3.6.B · Jacksonville code · read 2026-10-03
Required space from the rear line.
“Rear Setback, Minimum: 5”DTR district is proposed to: › 3.6.B · Jacksonville code · read 2026-10-03
Share of the lot the building footprint may cover.
“Terrace Coverage, 75%”DTR district is proposed to: › 3.6.B · Jacksonville code · read 2026-10-03
Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.
See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.
Free to score · No card, no signup · All 50 states