1. Zoning
  2. New York, NY
  3. R7A

New York, NY · zoning record

R7A zoning in New York, NY: height, setbacks and lot size

The dimensional standards that govern what you can build in the R7A district, straight from New York's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-10-02)

In New York's R7A district the maximum floor-to-area ratio is 4 (New York code Chapter 4 - Bulk Regulations for Community Facilities in Residence Districts, read 2026-10-02).

R7A dimensional standards.

These are the letter-of-the-law limits for the base R7A district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Floor-to-area ratio

4

Max floor area ÷ lot area.

Row as published“R7A | 4.00 | 80 | 65 | 65”
Chapter 4 - Bulk Regulations for Community Facilities in Residence Districts › Maximum Floor Area Ratio and Percentage of Lot Coverage › Floor Area Ratio › R7A row · New York code · read 2026-10-02

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Check a real New York lot against R7A.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states