1. Zoning
  2. Portland, OR
  3. RF

Portland, OR · zoning record

RF zoning in Portland, OR: height, setbacks and lot size

The dimensional standards that govern what you can build in the RF district, straight from Portland's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-10-02)

In Portland's RF district the maximum height is 30 ft (Portland code Table 110-4 Summary of Development Standards In Single-Dwelling Zones, read 2026-10-02).

In Portland's RF district the minimum front setback is 20 ft (Portland code Table 110-4 Summary of Development Standards In Single-Dwelling Zones, read 2026-10-02).

In Portland's RF district the minimum interior side setback is 10 ft (Portland code Table 110-4 Summary of Development Standards In Single-Dwelling Zones, read 2026-10-02).

In Portland's RF district the minimum rear setback is 10 ft (Portland code Table 110-4 Summary of Development Standards In Single-Dwelling Zones, read 2026-10-02).

RF dimensional standards.

These are the letter-of-the-law limits for the base RF district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Maximum height

30 ft

How tall the building may be.

Row as published“Maximum Height 30 ft. 30 ft. [3] 30 ft. [3] 30 ft. [3] 30 ft. [3] 35 ft.”
Table 110-4 Summary of Development Standards In Single-Dwelling Zones › Maximum Height (See 33.110.215 and 33.110.260) › RF column · Portland code · read 2026-10-02

Front setback

20 ft

Required space from the front line.

Row as published“- Front building 20 ft. 20 ft. 20 ft. 15 ft. 10 ft. 10 ft.”
Table 110-4 Summary of Development Standards In Single-Dwelling Zones › Minimum Setbacks › - Front building setback › RF column · Portland code · read 2026-10-02

Interior side setback

10 ft

Required space from a side line.

Row as published“- Side building 10 ft. 10 ft. 10 ft. 5 ft. 5 ft. 5 ft.”
Table 110-4 Summary of Development Standards In Single-Dwelling Zones › Minimum Setbacks › - Side building setback › RF column · Portland code · read 2026-10-02

Rear setback

10 ft

Required space from the rear line.

Row as published“- Rear building 10 ft. 10 ft. 10 ft. 5 ft. 5 ft. 5 ft.”
Table 110-4 Summary of Development Standards In Single-Dwelling Zones › Minimum Setbacks › - Rear building setback › RF column · Portland code · read 2026-10-02

Uses in RF

  • single-familyAllowed by right
  • two-familyNot allowed
  • manufactured-homeAllowed by right
“House Yes Yes Yes Yes Yes Yes · Duplex No Yes Yes Yes Yes Yes · (See Chapter 33.251) Yes Yes Yes Yes Yes Yes”single-family: Table 110-2 Housing Types Allowed In The Single-Dwelling Zones › House › RF column | two-family: Table 110-2 Housing Types Allowed In The Single-Dwelling Zones › Duplex › RF column | manufactured-home: Table 110-2 Housing Types Allowed In The Single-Dwelling Zones › Manufactured home (See Chapter 33.251) › RF column · Portland code · read 2026-10-02

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Other Portland districts on record.

Check a real Portland lot against RF.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states