1. Zoning
  2. Ballard, UT
  3. C1

Ballard, UT · zoning record

C1 zoning in Ballard.

The dimensional standards that govern what you can build in the C1 district, straight from Ballard's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-09-29)

C1 dimensional standards.

These are the letter-of-the-law limits for the base C1 district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Maximum height

35 ft

How tall the building may be.

“Maximum | 35 feet | 35 feet | 35 feet”Height · Ballard code · read 2026-09-29

Front setback

20 ft

Required space from the front line.

“Front* | 20* feet | 20* feet | 20* feet”Lot Areas and Setbacks · Ballard code · read 2026-09-29

Interior side setback

10 ft

Required space from a side line.

“Side** | 10 feet | 10 feet | 10 feet”Lot Areas and Setbacks · Ballard code · read 2026-09-29

Rear setback

10 ft

Required space from the rear line.

“Rear | 10 feet | 10 feet | 10 feet”Lot Areas and Setbacks · Ballard code · read 2026-09-29

Maximum building coverage

40 %

Share of the lot the building footprint may cover.

“Maximum lot coverage | 40 percent | None | None”Lot Coverage · Ballard code · read 2026-09-29

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Other Ballard districts on record.

Check a real Ballard lot against C1.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states