1. Zoning
  2. Ballard, UT
  3. I1

Ballard, UT · zoning record

I1 zoning in Ballard, UT: height, setbacks and lot size

The dimensional standards that govern what you can build in the I1 district, straight from Ballard's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-09-29)

In Ballard's I1 district the maximum height is 35 ft (Ballard code Height Regulations, read 2026-09-29).

In Ballard's I1 district the minimum interior side setback is 10 ft (Ballard code Area and Setback Requirements, read 2026-09-29).

In Ballard's I1 district the minimum rear setback is 10 ft (Ballard code Area and Setback Requirements, read 2026-09-29).

I1 dimensional standards.

These are the letter-of-the-law limits for the base I1 district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Maximum height

35 ft

How tall the building may be.

“No building or structure will be erected to a height greater than thirty five feet (35') unless otherwise approved with a conditional use permit.”Height Regulations · Ballard code · read 2026-09-29

Interior side setback

10 ft

Required space from a side line.

Row as published“Side** | 10 feet | 10 feet | 10 feet”
Area and Setback Requirements · Ballard code · read 2026-09-29

Rear setback

10 ft

Required space from the rear line.

Row as published“Rear** | 10 feet | 10 feet | 10 feet”
Area and Setback Requirements · Ballard code · read 2026-09-29

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Other Ballard districts on record.

Check a real Ballard lot against I1.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states