Buildability™
Score a property
  1. Zoning
  2. Richmond, VA
  3. R-53

Richmond, VA · zoning record

R-53 zoning in Richmond.

The dimensional standards that govern what you can build in the R-53 district, straight from Richmond's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-10-02)

R-53 dimensional standards.

These are the letter-of-the-law limits for the base R-53 district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Maximum height

35 ft

How tall the building may be.

“No building or structure in the R-53 Multifamily Residential District shall exceed 35 feet in height”DIVISION 10. R-53 MULTIFAMILY RESIDENTIAL DISTRICT › 30-418.8 · Richmond code · read 2026-10-02

Front setback

15 ft

Required space from the front line.

“There shall be a front yard with a depth of not less than 15 feet”DIVISION 10. R-53 MULTIFAMILY RESIDENTIAL DISTRICT › 30-418.5 · Richmond code · read 2026-10-02

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Informational only — not a permit, appraisal, or professional engineering opinion. Verify with your local planning department before acting on it. See Terms and data sources.

Other Richmond districts on record.

R-4R-3R-48R-1R-2R-43R-5R-6R-8R-5AR-73R-7

Check a real Richmond lot against R-53.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states