1. Zoning
  2. Washington Terrace, UT
  3. C-2

Washington Terrace, UT · zoning record

C-2 zoning in Washington Terrace, UT: height, setbacks and lot size

The dimensional standards that govern what you can build in the C-2 district, straight from Washington Terrace's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-09-29)

In Washington Terrace's C-2 district the maximum height is 60 ft (Washington Terrace code 17.28.020, read 2026-09-29).

In Washington Terrace's C-2 district the minimum street-side setback is 8 ft (Washington Terrace code 17.28.020, read 2026-09-29).

C-2 dimensional standards.

These are the letter-of-the-law limits for the base C-2 district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Maximum height

60 ft

How tall the building may be.

“Maximum – sixty (60) feet, measured from back of curb.”17.28.020 · Washington Terrace code · read 2026-09-29

Street-side setback

8 ft

Required space from a side street on a corner lot.

“Side – facing a street with a corner lot – Eight (8) feet on side yard while maintaining the sight triangle as defined in chapter 17 of the Washington Terrace Municipal Code: Sight Triangle.”17.28.020 · Washington Terrace code · read 2026-09-29

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Other Washington Terrace districts on record.

Check a real Washington Terrace lot against C-2.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states