1. Zoning
  2. Washington Terrace, UT
  3. R-1-10

Washington Terrace, UT · zoning record

R-1-10 zoning in Washington Terrace, UT: height, setbacks and lot size

The dimensional standards that govern what you can build in the R-1-10 district, straight from Washington Terrace's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-09-29)

In Washington Terrace's R-1-10 district the accessory structure setback is 1 ft (Washington Terrace code 17.12.070, read 2026-09-29).

R-1-10 dimensional standards.

These are the letter-of-the-law limits for the base R-1-10 district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Accessory structure setback

1 ft

Required space from a lot line for a shed, garage or other accessory structure.

Row as published“Private Garage And Other Accessory Buildings If Located At Least 6 ft. To Rear Of Main Building. No proviate Garage to be closer than 10 ft. to a dwelling on adjacent lot. | 1 ft. | 1 ft. | 1 ft.”
17.12.070 · Washington Terrace code · read 2026-09-29

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Other Washington Terrace districts on record.

Check a real Washington Terrace lot against R-1-10.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states