Buildability™
Score a property
  1. Zoning
  2. Washington Terrace, UT
  3. O-1

Washington Terrace, UT · zoning record

O-1 zoning in Washington Terrace.

The dimensional standards that govern what you can build in the O-1 district, straight from Washington Terrace's ordinance, with every figure quoting its source. Check a specific address to see how these rules apply to a real lot.

Free · Every figure cited · Read from the current code (2026-09-29)

O-1 dimensional standards.

These are the letter-of-the-law limits for the base O-1 district. Overlays (historic, neighborhood plan, and similar) can tighten them; a specific address check resolves the overlays that actually apply.

Maximum height

35 ft

How tall the building may be.

“Maximum: Two and one-half (2 1/2) stories or thirty five feet (35').”17.30.040 · Washington Terrace code · read 2026-09-29

Front setback

30 ft

Required space from the front line.

“Minimum yard setbacks for structures: Front: Thirty feet (30').”17.30.040 · Washington Terrace code · read 2026-09-29

Interior side setback

20 ft

Required space from a side line.

“Side: Twenty feet (20') each side.”17.30.040 · Washington Terrace code · read 2026-09-29

Rear setback

30 ft

Required space from the rear line.

“Rear: Thirty feet (30').”17.30.040 · Washington Terrace code · read 2026-09-29

Sources

Every figure above is quoted verbatim from the current ordinance. We never substitute a typical-for-zone default: a field absent from the record shows nothing, not a guess.

Informational only — not a permit, appraisal, or professional engineering opinion. Verify with your local planning department before acting on it. See Terms and data sources.

Other Washington Terrace districts on record.

R-1-8R-1-10C-2

Check a real Washington Terrace lot against O-1.

See how these standards resolve on a specific parcel, with the overlays that actually apply, in about 20 seconds.

Free to score · No card, no signup · All 50 states